Custom Coating and Laminating Equipment Line

          Coating, Laminating and Embossing Systems for a wide range of Industries and Products

          Learn More


          Turret Unwind Equipment

          Unwind Systems with Automatic Tension Control, Guiding and a Range of Chucking Options

          Learn More


          Turret Winder with Zero Fold-over transfer mechanism (carousel winder)

          Winding Systems with Automatic Tension Control, Guiding and a Range of Chucking Options

          Learn More


          Modular, Cartridge Style Gravure and Offset Gravure Coating Station

          A Variety of Hot Melt, Water & Solvent Based Web Coating Station options for both Dedicated Coating or Modular Systems

          Learn More


          Calender Station with Roll Bending

          High and Low Pressure Nip Sets for Combining or Calipering a Range of Materials

          Learn More


          Web Cooling Roll Station

          Web Conveyance Equipment Including Pull Rolls, Heating & Cooling Stands, Flips and Turns

          Learn More


          Custom Roll Handling Carts for Unwinds and Winder

          Custom Roll Handling Equipment for Unwind and Rewind Equipment

          Learn More

          NARROW WEB

          Narrow web battery coating & drying line

          Narrow web Coating, Laminating & Embossing Equipment for Pilot Scale or Production Environments

          Learn More


          Allen-Bradley Multi-Bay Drive Panel

          Drive & PLC Cabinets, HMI’s, SCADA Systems and more

          Learn More


          Cleanroom Coating, Laminating and Embossing Line

          Cleanroom Coating, Laminating and Embossing Systems and Components

          Learn More


          Four Zone, Electrically Heated Air Floatation Dryer

          Fully Integrated Web Drying Systems for a variety of Web Coating Applications

          Learn More


          Solution Pumping and Mixing System

          Specialty Equipment and Ancillary Systems for Web Handling and Converting Systems

          Learn More


          Downloadable Brochures in PDF Format Learn More
  • Facilities
  • Services
  • Technology
  • News
  • Contact

New Era Converting Machinery Inc. to Feature Patent Pending LLS Unwind System at ICE USA

ICE USA, Louisville, KY, April 9-11, 2019 – Booth 501

Paterson, NJ (November 9, 2018) . . . New Era Converting Machinery Inc. will showcase its patent pending LLS Unwind System at the ICE show in Louisville, KY, April 9-11.  New Era’s booth #501, located directly in front of the show hall entrance, is once again the largest booth space at ICE USA.

The LLS (Lap-Less Splice) Unwind is designed to provide a fully automatic, Lap-Less Splice between the end of an expiring roll and the leading edge of a new roll. The system is suitable for use on a wide range of materials and can operate at speeds in excess of 1,000 fpm without the need for slowing or accumulating the web. The system provides a splice with tape on both sides of the web and can be used on any material which can be cut with a rupture style knife.

“The ability to provide a splice which is functionally identical to a butt splice, without the need for an accumulator, is a game changer for our industry,” says Bob Pasquale, President of New Era Converting Machinery, Inc. “The LLS Unwind allows for the formation of a lap-less splice at high speeds without the need for slowing or stopping the web and without the need for operator intervention.”

Visitors will be able to see the unwind completely assembled, while having the opportunity to speak with the technical staff on hand about how it all works.  New Era can offer the LLS Unwind solution as part of a new web line, or for integration into an existing web line. As part of the technology, New Era has developed a test center at it’s headquarters in Paterson, NJ which can run at up to 80” wide and 1,000 FPM to demonstrate the LLS Unwind’s viability for each specific client’s materials and process speeds.  “We wanted to make this line available to our customers to provide a level of comfort for those integrating the LLS into an existing operation or utilizing the LLS for the first time,” said Bob Pasquale, President at New Era.

In addition to the LLS Unwind, New Era will be bringing a modular (cartridge style) coating head complete with two gravure coating modules, a J-Arm style tapeless transfer turret winder and a purpose-designed laminating station.  These equipment sections are all part of larger equipment lines currently being custom fabricated by New Era.

“New Era has exhibited at every ICE USA show and can attribute at least one major capital equipment sale to each show we attended,” said Bob Pasquale, President at New Era.  “This says a lot about the quality of leads being generated at the show and the type of attendees it attracts.”

ICE USA, Louisville, KY, April 9-11, 2019 – Booth 501